How do I check the signal strength of my M-001?Updated 9 hours ago

The WALLHACK M-001 receiver features integrated hardware controls for DPI adjustment, polling rate adjustment, battery charging, and signal monitoring functionality through the STATUS button.

When the STATUS button is pressed and held, the receiver enters Signal Strength Check mode. During this mode, the receiver displays the real-time wireless connection quality between the mouse and receiver using illuminated blue LED indicators.

Because the receiver is designed to remain within close proximity of the mouse for optimal high-polling-rate wireless performance and convenient on-the-fly adjustment access, maintaining a signal strength reading of approximately 4 to 5 illuminated LEDs is recommended. Lower signal readings, such as 1 to 2 illuminated LEDs, may indicate a weaker wireless connection which can increase latency, reduce signal stability, or negatively affect overall performance.

What to do:

To quickly check the wireless signal strength of the WALLHACK M-001, follow the steps below:

1. Ensure the mouse is powered ON and actively connected to the receiver.

2. Press and hold the STATUS button located on the receiver.

3. Wait for the LED indicators to illuminate blue. One LED may flash while additional LEDs remain solid, indicating the current real-time signal strength between the mouse and receiver.

4. If signal strength is low, move the mouse closer to the receiver or reposition the receiver closer to the primary play area to improve connection quality and wireless stability.

For optimal performance, maintaining a signal strength reading of approximately 4 to 5 illuminated LEDs is recommended.